Honeycomb paper core is more low carbon environmentally friendly or will guide the trend of panel furniture

Following the successful application of the "Cellular Paper Core for Furniture (Plate)" and the successful completion of the standard formulation in 2011, the industry standard "Technical Requirements for Honeycomb Panel Components for Furniture", which was secondly reported by Shunde Vocational and Technical College, was It was included in the second batch of industrial industry standard revision and revision plan of the Ministry of Industry and Information Technology in 2010 (plan number is 2010-2708T-QB). The former is the standard for furniture materials and the latter is the product standard.

Through the joint efforts of the government, associations, quality supervision departments, enterprises and schools, through the research, declaration and formulation of these standards, the application of honeycomb paper cores in furniture, packaging and building walls is continuously promoted and improved. This also marks the country's high attention and strong support for the environmentally-friendly material of “paper-based wood” – honeycomb paper core. At the same time, it studies and regulates the production of furniture from the honeycomb core of the standard layer, and has an important society. Ecological and economic significance.

Honeycomb panel for furniture

Representing the direction of world advanced manufacturing

Honeycomb panel for furniture is a composite panel made of thin wood-based panels and stretched, shaped and dried furniture honeycomb paper cores by sizing and pressure bonding; honeycomb panel components for furniture are sealed by honeycomb panels. Various types of panels, such as panels, side panels, bottom panels, door panels, laminates, etc., which are made by processes such as edge and surface decoration. Honeycomb panels are the basic unit of furniture. Sometimes "parts are products", the panels are already products, such as shelves, which become furniture after being installed on the wall.

At present, there are two main types of honeycomb panel components for furniture, which are "framed honeycomb panel components" according to different manufacturing methods and structures. The components of such a method are relatively common, that is, components made of honeycomb panels with a frame; The other type is a "frameless honeycomb panel member", that is, a honeycomb panel member which is formed by cutting and sealing the finished honeycomb panel for furniture according to the dimensional requirements of the furniture component.

The difference between them is that the framed method is tailor-made according to the size of the designed parts. It needs to be nailed frame, which is more flexible. It can increase the inner struts according to the strength, but the degree of mechanization is low, suitable for many varieties. Small batch practices, relatively low cost and long production cycle. The frameless method is suitable for mechanized operation, with large equipment investment, high efficiency, good quality, higher requirements for hardware accessories, and currently not perfect in structural processing, but can realize customized production on a large scale, representing the current world advanced manufacturing. In the current direction, only South East China Sea Environmental Protection Materials Co., Ltd. in Shunde, Guangdong, China uses this advanced technology to make customized wardrobes for honeycomb panel parts.

Promote honeycomb panel components

About 10 million cubic meters per year

The reason why we should vigorously develop the furniture of honeycomb panel parts is based on the problem of the serious shortage of timber resources in our country and the carbon emission promised by the people in the world. At the same time, there is also a demand for such furniture in the market.

In the 30 years of reform and opening up in China, the real estate industry and furniture manufacturing industry have developed vigorously and have consumed a large amount of wooden boards. According to incomplete statistics, there are more than 50,000 furniture manufacturing factories in China. In 2012, furniture sales exceeded 10 billion yuan, becoming one of the four major consumer goods after automobiles, clothing and household appliances. The annual wood consumption is as high as 50-60 million cubic meters, and it continues to grow rapidly. According to the National Energy Conservation and Emission Reduction Manual released by the Ministry of Science and Technology, each saving of 1 cubic meter of wood can save 250 kilograms of standard coal and reduce 643 kilograms of carbon dioxide emissions. If 20% of the total wood consumption in China's furniture manufacturing industry is replaced by honeycomb paper cores for furniture, and only carbon dioxide emissions are reduced, China can reduce carbon emissions by about 15.43 million tons per year. If you can widely use the honeycomb panel components for furniture in the furniture manufacturing industry, you can save about 10 million cubic meters of wood per year.

The honeycomb panel parts for furniture, especially in the form of flat plates, are the composite parts of wood-based panels and wood-wood composites, which are light-weight, non-deformable and convenient to transport, and are also excellent in performance, environmental protection and low-cost furniture. Semi-finished or finished products, the product has been widely used in panel furniture, and has broad prospects for promotion. It can reduce and alleviate the pressure of China's timber resources and the contradiction between supply and demand, reduce carbon emissions, improve the safety of China's resources and environmental protection of furniture. Sex.