[ Chinese wardrobe net ] What kind of position does the wardrobe play in the home life, and what kind of influence on the home life, I believe many friends know.
Why use solid wood multi-layer boards for wardrobes? Mainly because the solid wood multi-layer board has some advantages that other boards do not have, it has many advantages in the current formal solid wood multi-layer board:
1. Environmental performance under the same conditions
The first point: the original material. From an objective point of view, the raw materials of the particle board are the wood chips, residues, broken particles of the old doors and windows, and even the waste paper boxes are broken, etc., such raw materials are low in cost and difficult to control, so the quality is difficult to control, so The level of environmental protection is difficult to control.
Conscience manufacturers will choose real wood chips and wood slag, and black heart manufacturers even use raw materials such as sand and old flooring with serious formaldehyde.
Multi-layer boards, especially multi-layer solid wood boards, are made of large-diameter wood. Although the cost is increased, the wood used can be guaranteed, which makes it easier to control the environment.
The second point: adhesive. We all know that whether the wardrobe is environmentally friendly depends on the board, and whether the board is environmentally friendly depends on the adhesive. At present, the highest level of particle board in China can only reach the E0 level, and the excessive dosage will lead to excessive formaldehyde.
The multi-layer board uses the protein glue. This soy protein glue is aldehyde-free, so the finished multi-layer board can reach the US CARB-certified NAF level, meaning that it will not cause formaldehyde to exceed the standard.
2. Multi-layer board raw materials are made of solid wood (large diameter wood in the trunk part)
The raw materials used in various other wood-based panels, except for wood-based multi-layer boards, require logs, mostly from harvesting and processing residues, and small-diameter materials (less than 8 cm in diameter).
3. The size is more stable
The production process of the solid wood multi-layer board is made by pressing a layer of veneer vertically and vertically, and the adjacent layers of the fibers are perpendicular to each other to improve the anisotropy of the wood under natural growth conditions, and the improvement is improved. Dimensional stability. For finished wardrobes, the service life is longer.
4. Not easy to deform, no cracking
The solid wood multi-layer board is made of multi-layer veneers arranged in a crisscross pattern, and the high-quality wood is selected as a panel. After being glued, it is made by high temperature and high pressure in a hot press.
The deformation and cracking of the sheet is mainly composed of water content and other factors. The solid wood multi-layer board can strictly control the moisture content of each veneer in the production process, so the quality of the finished board is more guaranteed.
It is not easy to be deformed and cracked, and the dry shrinkage expansion system is small. It solves the two major defects of deformation and cracking of solid wood panels from the aspect of internal stress.
5. Strong strength and good flatness
The unique production process and raw material selection of solid wood multi-layer board determine its unique quality. The solid wood multi-layer board is made up of multi-layer veneers arranged in a crisscross pattern, and then is produced by several processes such as cold pressing, hot pressing and sanding. It is made of high strength, good nail holding power and high flatness.
6. Large sheet size
Multi-layer solid wood boards are cut from logs into single boards and then arranged in a staggered manner. In theory, the width of solid wood multi-layer boards can be infinite, but it is actually produced according to the national standard size.
This is very different from other plates, such as other particle board and MDF, completely using waste scraps, even if the adhesive combination is again, there is no original wood such as solid wood laminate.
This also solves the shortcomings of insufficient solidity of the solid wood board due to the influence of the material age and growth rate.
7. Easy to process, easy to produce
The solid wood multi-layer board has precise thickness, long and wide width, and is suitable for most furniture. It is close to solid wood, has no special requirements for processing machinery, processing saw blade, processing technology, etc. It is easy to process and easy to form.
An ordinary woodworker can also use the solid wood multi-layer board to make a beautiful and practical wardrobe.
8. Good quality, high price ratio
The multi-layer solid wood board is the artificial board closest to the logs. However, it is better than the strength of the logs, good toughness, large area, not easy to deform and crack, and the quality is better, but the actual price is lower than the logs, the effect is close to the logs, and the cost performance is high.
9. In line with current consumer trends
In the market dominated by the current custom furniture, solid wood multi-layer boards are generally used for custom-made wardrobes, so that various finished wardrobe products are well received by customers, and the use of multi-layer custom-made wardrobes is also the current trend.
Pet Combs put hair into different positions and styles and are used for parting and braiding. The reason why there is such an array of different combs in the grooming industry is because dog and cat hair have such a wide variety of thickness, texture, and length. Combs keep your pet beautiful and healthy.
Pet Comb
Yangzhou Pet's Products CO.,LTD , https://www.yzpqpets.com