Correct selection of paste glue

To control the corrugated box glue box without opening the glue, it is very important to use the right glue box glue. Once the paste box glue is used wrong, it will cause the whole batch of corrugated box to open.

The basic principle of choosing glue glue is: Select different glue according to the different surface treatment methods of corrugated box paper.

If the corrugated box's sticky mouth is plain paper and common paper surface, sticky box can use ordinary white latex; if it is paper and film surface (including light film and matte film) bonded label, paste box Need to use paper plastic water, but also with the film surface material selection of different paper plastic water, such as PET or OPP film surface in the paste box should be used when selecting different paper plastic water; if it is paper and UV The surface of the varnish is bonded, and the UV glue is used when gluing; if it is the bond of the paper surface with the polished surface, the polishing glue is needed when the paste box is used.

Scanning format: hand-glued or gluing cartridges are slow in speed, and fine-printing research is conducted. Open time (from the time when the glue is in contact with the adhesive and the adhesive can no longer move freely) should be selected; the automatic glue or paste box The speed is fast and glues with short opening time should be used.

When using glue glue, you must also consider the working environment of the paste box workshop. The glue used in winter and the glue used in summer are different in the ratio, because the same brand, the same batch of glue, digital printing at different ambient temperatures, the viscosity is different, the lower the ambient temperature, The higher the viscosity of the glue. Whether it is winter or summer, the sticking box production process requires the glue to reach the viscosity that is most convenient for the production operation. Due to the low temperature in winter and the higher viscosity of Esko, the adhesive manufacturer of corrugated box manufacturers will have a certain influence if they add thinner to adjust the viscosity of the glue.

Therefore, the use of glue at lower ambient temperatures, to maintain the glue adhesive force and the normal reaction mechanism of the glue, it is necessary to make corresponding adjustments to the formulation of the glue Beiren Group, which is also a lot of use in the South is very mature The reason why the glue cannot be used directly in the north is. In addition, we must also consider the use of corrugated boxes, if the corrugated box after the cassette needs to be sent to a high-temperature environment, you need to use a high-temperature paste glue box; if the paste box after the corrugated box needs to be sent to a low temperature environment The use of packaging design, you need to use a low temperature paste glue box.

Polishing performance: If the automatic folder-gluer is equipped with a spray gun, it must use the appropriate glue. At the same time, the performance of the gun control system must also be considered. If the gun control system is a hot melt method, hot melt adhesive must be used; if the gun control system is digitally printed in China without heating, a cold spray adhesive must be used.

The above are the precautions that should be taken when using plastic glue to prevent the opening of corrugated boxes. Of course, when using glue, we must also consider whether it is environmentally friendly, whether it is food grade, whether it is anti-mildew and so on. We will not elaborate here.