The constant temperature and humidity chamber is equipped with a closed refrigeration unit, which has the advantages of stable operation, a small amount of noise and a stainless steel finned heating tube to heat the air. Heated, anti-rust and anti-corrosion, it also has a French (Tai Kang) fully enclosed compressor unit.
The design of the water tank in the constant temperature and humidity test chamber has both advantages and disadvantages. When it is used for a long time, the damage of the parts will occur. When this happens, how should we solve it:
1. Check the waterway to see if the inlet valve is too big, resulting in too much water. If the water valve is closed directly,
2. Check if the water replenishment time of the constant temperature and humidity chamber is set too high, resulting in too much water replenishment. If it is necessary, the interval of replenishment should be increased, so that the frequency will be reduced;
3. Check whether the floor of the laboratory is flat, because the angle of inclination is also a factor that causes the water imbalance of the wet bulb, so that the water is dripped down. At this time, just move the equipment to the flat ground and use it.
4. Check if the water level box on the right side of the test box is too high, which will cause too much water to enter. At this time, it is necessary to adjust the position of the water level box. Xiaobian also recommends that the technical engineer should be the best when adjusting the water level box. Communicate and implement related actions.
Popularization of knowledge: The constant temperature and humidity chamber is provided with multiple protection measures. The temperature system is equipped with an over-temperature protector under the condition that the maximum safe allowable temperature can be set, and the air heating element can be automatically powered off and the humidification system can be stopped with the rotating fan. The power supply can be stopped as the water level in the humidification tank is lowered.

Outdoor Wicker Daybed is modern stylish choice for resort and hotel projects.The contemporary design is combined with all-weather PE wicker,study aluminum frame and UV protected fabric cushion.
Outdoor Wicker Daybed is classic among patio furniture. They are easy in maintenance and look naturally, plus they are ideal for the terrace,patio and poolside. Wicker furniture is available in many different versions – sectional outdoor sofas, sofas, sets or chairs. The full offer is available on our website. Since the demand for furniture has grown in recent years, the wider offer has been created. We are convinced that our broad and attractive assortment will suit any tastes.
Features
· Perfect for simply relaxing in your holiday with family and friends
· Waterproof and UV-resistant wicker rattan
· Removable thick cushions
· Waterproof fabric is engineered to endure the weather and resist fading, mildew, and stains to extend the life of your cushion
· Powder-coated aluminum/synthetic wicker/polyester
Maintenance tips
· Do not use any abrasive cleaning agents for cleaning
· Clean the chaise lounge with a damp, soft cloth (you may use a mild cleaning agent) and wipe it dry afterwards
· In case of ceaseless heavy rain or during the winter, the furniture should be stored inside or have a protective cover on it
If you have any questions, please contact with us directly. Outdoor Sofa Furniture are produced
by Golden Eagle Outdoor Furniture With High Quality and Good Appearance. Welcome you can visit our Factory.For any inquiry,Please send mail directly to us.
Wicker Furniture,Wicker Daybed,Wicker Sofa Set,Outdoor Wicker Furniture,Wicker Patio Furniture,Wicker Rattan Furniture
Golden Eagle Outdoor Furniture Co., LTD. , https://www.geleisurefurniture.com