What should I pay attention to when purchasing hotel furniture?

Hotel furniture includes: hotel room furniture, Living Room Furniture, dining room furniture, public space furniture, conference furniture, etc. The environment in which the hotel furniture is located is different from the furniture we usually use, so there are some special things to pay attention to when purchasing.

1. Wood moisture content does not exceed 12%

The moisture content of hotel furniture must not exceed 12%, the water content is high, and the wood is easy to warp and deform. When the general consumer buys, there is no test instrument. You can take the method of hand touch and touch the bottom of the hotel furniture or the place where there is no paint inside. If you feel the moisture, then the moisture content is at least 50%, which cannot be used at all.

2. Is the hotel furniture material reasonable?

Different hotel furniture, surface materials are different. For example, the legs of tables, chairs and cabinets require hardwoods, which are relatively strong and can bear the weight, while the internal materials can be used with other materials; the thickness of the large wardrobe legs is 2.5cm, too thick and clumsy, thin and easy to bend Deformation; kitchen and bathroom cabinets can not be made of fiberboard, but should be used with plywood, because the fiberboard will expand and damage when exposed to water; the dining table should be washable. It was found that the wood had insect eyes and foaming, indicating that the drying was not complete.

3. Is the furniture furniture four feet flat?

This point is flat on the ground, and some hotel furniture has only three legs to land. Look at the desktop is straight, can not bow back or collapsed. The table top is raised, the glass plate is placed on it, and the table top is recessed, and the glass plate is crushed by a pressure. 5. Veneer hotel furniture is not strict

4. Is the hotel furniture structure firm?

Small pieces of hotel furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when picking, gently falling and falling, the sound is crisp, indicating good quality; if the sound is dumb, there is a murmur, It shows that the blinking is not tightly combined and the structure is not strong. The desk and table can be shaken by hand to see if it is stable. The sofa can sit and sit. If you sit on a move, you will twist and sway. If you shake it, it will be a nail, and it will take a long time. Square tables, tables, chairs and other legs should have four triangular clips, which can be used for fixing. When you choose, you can look over the table and chair. The cloth chair can be touched by hand.

5. Veneer hotel furniture is not strict

Whether it is veneer veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is drum, foaming or not. Look at the light when you check it, and don't see it when you don't. The furniture of the ash veneer veneer is relatively damaged, and it can only be used for two years. In the case of wood veneers, the veneered veneers are better than the chopped ones.

Hotel furniture is used by a large number of mobile workers every day, so in addition to ensuring the quality of hotel furniture accidents, but also to ensure that most people are satisfied with the use of the site, in addition, hotel staff should also carry out daily disinfection.

For more information on the Chinese furniture industry, please pay attention to the official website of Xianghe Furniture City ().