The palace chair is a typical representative of the palace furniture. It is stable and imposing. For some formal occasions that require solemnity and majesty, the majesty of a palace chair can be expressed not by imported European furniture or American furniture. The palace chairs on the market are even more varied, but what kind of palace chair is good? Here, we ask professionals to provide four simple and convenient practical suggestions for consumers:
The first trick: the back legs of the palace chair are made of wood, and the four legs are moderately curved.
The hind legs of the palace chair should be dug with a piece of wood, and the four legs should ensure a certain degree of outward curvature. The so-called "expanding drum legs" is here. Nowadays, when the materials are scarce, some companies make palace chairs. The teeth and legs of the hind legs are not one piece of wood, but they are connected by another opening, so that the workers directly cut the legs and then connect the plates with wedges. It is very easy. However, if a wood is used, the excess material on the back of the whole leg should be manually cut away, and the part of the tooth is difficult to engrave. It can be said that a chair that does not use a wooden one is more than five times more expensive than a wooden one.
The second measure: the seesaw of the palace chair must be flat.
The palace chairs on the market generally choose to put an eye-catching wood on the backrest to increase the sense of honor of the entire chair. When selecting such a palace chair, it should be noted that it is necessary to select a chair with a flat-panel approach, because it is uncomfortable for a person to sit on a seat without a flat backrest. This principle seems simple, but many manufacturers will ignore this problem in order to save labor.
Related reading: The emperor's throne and craftsmanship of the palace furniture
The third measure: the handrail of the palace chair is “crossed†and the carving is thorough and clean.
The armrests of the palace chair should be of a moderate size first, and the “handle†is the most suitable. In addition to the size, the carving on the armrest is more important. Regarding the pattern of the handrail, the manufacturer who pays attention generally uses the so-called "misplaced carving" method, that is to say, the vine pattern on the armrest is not a simple one-sided openwork, and the patterns on both sides are not uniform. After the carving on the armrest is flattened, it will be a complete vine pattern. This kind of practice is used in porcelain, furniture, and bronze. It is commonly called "over-branch" and it is a very labor-intensive practice. In addition, the interior of the handrail carving should be dug and dug, and it should look clean and thorough.
The fourth measure: the length of the chair of the palace chair is exquisite.
The chair ring of the palace chair is generally made up of several pieces of curved wood. The length of these pieces is exquisite. The parts connected with the wood of the chair ring are the backrest, the hind leg and the tie bar. The thickness of these three "pillars" is inconsistent, the backrest is wide, the back leg is cut and the gang is narrow, so in order to match the harmony, the piece of material connected to the backrest on the seat ring should be the widest, and the back leg is cut. The material used for the chair ring connected to the gang can be slightly narrower.
China Brass Knurled Nuts,Brass Thumb Nut,Electrical Lock Nuts Supplier
Brass Knurled Nuts,Brass Thumb Nut,Electrical Lock Nuts,Brass Female Threaded Insert
China Brass Knurled Nuts,Brass Thumb Nut supplier & manufacturer, offer low price, high quality Electrical Lock Nuts,Brass Female Threaded Insert, etc.
we are factory, we had made the Brass Nut 15 years, we can give you good serve and quanlity.
Brass Knurled Nuts,Brass Thumb Nut,Electrical Lock Nuts,Brass Female Threaded Insert
Shenzhen Lanejoy Technology Co.,LTD , https://www.szbrassnuts.com