The solid wood door means that the material for making the wooden door is natural wood or solid wood laminated material taken from the forest. The finished door after processing has the characteristics of no deformation, corrosion resistance, crack resistance and heat insulation. So everyone knows how to choose a solid wood door?
First, look at the paint
1, look at, touch the fullness of the paint film, this will be more than a few times will be seen. The paint film is full, indicating that the quality of the paint is good, the polymerization power is strong, and the sealing of the wood is good. At the same time, the painting process is relatively perfect, and there is no suspicion of cutting corners;
2, stand to the door (renovation effect map) on the oblique side to find the reflective angle of the facade, to see if the surface of the paint film is flat, orange peel phenomenon is obvious, there are no protruding fine particles. If the orange peel phenomenon is more obvious, it means that the baking process of the paint film is not enough;
3, fancy modeling door, it depends on the edge of the line that produces the shape, especially the negative angle (that is, the angle that can not be seen), there is no cracking of the paint film;
4, ask the type of paint, the basic answer is PU paint (polyurethane paint), we pay attention to the advantages of PU paint is easy to polish, the process saves time and effort, the disadvantage is that the paint film is soft, slight bumps are easy to produce white shadow dent. If at least one layer of PE paint is in the paint layer, this possibility is greatly reduced. The advantage of PE paint (polyester paint) is that the paint film is hard, the hiding power is strong, the transparency is good, and the veneer texture can be better expressed. The disadvantage is that it is difficult to polish, and the processing process is time-consuming and laborious. Most manufacturers are not willing to use PE coating.
Second, look at the flatness of the surface
1. The veneer is foamed, indicating that the veneer is unevenly heated during the attaching process, or the glue is not uniform, and the flat hot press can solve the problem of uneven heating when the flat door is pasted;
2, the flatness of the wooden door surface is not enough, indicating that the plate selection is relatively cheap, the flatness of the plate is not enough, it can be imagined that the environmental performance is also difficult to meet the standard, a little leaf Yiqiu means it;
3. See if the joints of the process are even and small: look at whether the joints of the craft are even and even, which is similar to the choice of the car, directly reflecting the comprehensive technological level of the enterprise;
4, look at the installation quality: finished product door in the factory to complete the production, but the real product is handed over to the customer to calculate the product is completed, so the door from the factory is only a semi-finished product, installation is the key link. Good installation process, good installation tools, and experienced installation technicians are the key to the success of the installation;
5, look at the hardware: Finally talk about hardware, hardware is a very easy thing for wooden door manufacturers and customers in the judgment of the quality of the door, it is recommended that customers try not to buy their own hardware, if the manufacturer can not provide the desired hardware products, You must choose the hardware products of famous brand manufacturers, such products are generally guaranteed for life.
Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }It is a special slitting machine for Li-ion battery electrode sheet slitter
With the help of our efficient workforce, we are able to provide Slitting Machinery that is sourced from the the market. These machines are widely used for slitting and rewinding of various roll material such as PET, Paper, CPP, BOPP and Aluminum foils and Li-ion battery electrode sheet . Our range of machinery has gained appreciation from the clients due to its durability, reliability, corrosion resistance, high performance and
Lithium Battery Slitting,Lithium Polymer Battery Slitting Machine,Li-Battery Film Slitting Machine
Sunny Machinery Factory , https://www.stsunnymachine.com